D-RX 250

Combined probe

Certified dust monitor, combined with a flow, temperature and absolute pressure measurement for monitoring of small to medium dust concentrations in dry flue gas and process gas.

Overview

  • Only one probe / mounting hole in the exhaust duct
  • Allows calibration to measure the dust concentration in mg/m3
  • Compact design, no moving parts, no consumables
  • Allows calibration to flow in m3/h
  • LCD displays measured values
  • 4 analog output signals
  • Parameters are set at the control device without a PC
  • Control and evaluation unit can be located in a distance up to 1000 m

Applications

Suitable for dust mass concentration measurement

  • at incineration in general,
  • at installations according 2000/76/EC WID / 17 BImschV
  • at garbage, hazardous waste incinerators,
  • at facilities for cement production
  • at installations according 2001/80/EC LCPD / 13 BImschV / Clean Air Act
  • at power stations with gas, oil, coal or co-firing
  • at installations for the incineration of biomass
  • at facilities pursuant to 27th BImschV


Suitable for monitoring of filter systems

The measurement principle is not suitable for use directly behind electrostatic filters.

Technical Data

measurementstribo-value - dust-concentration
differential pressure - velocity - flow rate
sample gas temperature
absolute pressure
sample gasair, fluegas, non flammable process gas
dust concentration**
(typical values at the site)
2 - 50 / 5 - 100 / 10 - 200 / 20 - 500 mg/m3
sample gas velocity***7-35 m/s
duct diameter> 0,3 m
sample gas temperature0 - 200°C / 350°C*
sample gas pressure (relative to ambient pressure)-100 bis +300 hPa
sample gas moisture20 ... 80% rel. humidity
ambient temperature-20 to +50 °C
measuring principledust: measuring the transfer of electrical charge from dust particles to an electrode in flowing sample gas
flow: measuring the differential pressure created by a multi point pitot tube
typein situ, mounted at stack, probe is in contact with sample gas
system componentsD-RX 250 S measuring head
D-RX 250 T transmitter
D-RX 250 D display and control unit
D-FL 100 DDMH differential pressure transmitter
D-RX 250 G purge air unit*
accessories
measuring ranges0 - 100% Tribo value, at 8 ranges
0 - 400°C
0 - 10hPa / 60 hPa* differential pressure
800 - 1300 hPa absolute pressure
expanded uncertanty
EN14181 / EN ISO14956 / EN15267-3
better than 2,8 mg/m3
at particles 1-2micron
output rangesassignment of tribo value to an analog output, either as raw value or scaled as dust concentration in mg/m3 after correction of changing flow
assignment of dP signal to an analog output, either as raw value or scaled as flow speed in m/s or scales as flow rate in m3/h or mN3/h
assignment of T-Signals to an analog output
assignment of P-abs-Signal to an analog output
process connectionflange, similar to DN65 PN6, pitch circle 130mm
tube, ID=70, L= 120mm
flange, similar to DN80 PN6, pitch circle 150mm
tube, ID=100, L= 200mm*
signal output1 x RS 485 Modbus RTU
status output1 x transistor output, in operation
supply24 V DC from D-RX 250 T
protectionIP65
dimensions (h x w x d)180 x 180 x 360 mm + length of probe
380 x 205 x 465 mm + length of probe*
lenght of probe: 250 / 400* / 700* / 1000* mm
weight9,5 kg
materialAl cast alloy, painted RAL 5017
isolator: ceramics
probe: 1.4571
signal outputRS 485 Modbus RTU
status output1 relay output, max load 48 V / 0,5 A
status input1 input for external dry contact - maintenance
signal input2 x 4-20mA connected to Pabs- and, dP-Transmitter
supply90-264 VAC, 48-62 Hz, 10 VA, supplies D-RX 250 P
ambient temperature-20 - 50°C
protectionIP 65
dimensions (h x w x d)270 x 190 x 135 mm
materialhousing: Al cast alloy, painted RAL 5017
weight5 kg
measuring range0 - 10 hPa
signal output4 - 20 mA
supply14 - 32 VDC, from D-RX 250 T
ambient temperature- 40 to 85 °C
protectionIP 65
dimensions (h x w x d)190 x 120 x 90 mm
measuring range800 - 1300 hPa
signal output4 - 20 mA
supply14 - 32 VDC, from D-RX 250 T
purge air rate5 - 10 m3/h
supply90 - 264 V, 47 - 63 Hz
dimensions (h x w x d)380 x 300 x 210 mm
weight12 kg
material1.4301
remarks* variants
** the suitability of D-RX 250 for the listed ranges depends on the kind of dust and its size distribution.
***The measuring effect is influenced by the stack gas velocity. The influence is compensated.
Subject to technical modifications!

Your contact options

Email

Contact

Sales

Sales

Service

Service

LinkedIn

LinkedIn

Xing

Xing

Facebook

Facebook