AAC 76
Flame monitor with flame signal converter
Particularly cost-effective, fail-safe flame monitor with flame signal converter for the monitoring of gas and oil burners as well as gas and oil fired igniters.
Technical Data
Type | AAC 76 |
---|---|
AAC 76 P0D/... | for continuous operation and intermittent operation |
AAC 76 P0D/_G... | Special version with gold plated contacts |
Operating voltage | 230 V or special voltages: 115 V / 125 V / 250 V |
Ambient temperature | - 20 °C to + 60 °C |
Flame monitor | Safety time (flame failure detection time ffdt) ≤ 1/3/5 s |
Display | LED/Bargraph (optional) |
Protection category: Housing | IP 40 |
Protection category: Plug-in terminal blocks | IP 20 |
Flame signal output | 90 -110 VDC |
Housing attachement | on 35 mm DIN-rail |
Dimensions | 91 x 104 x 119 mm (WxHxD) |
Weight | approx. 0.65 kg |
Output signal current interface | 4 - 20 mA |
Apparent ohmic load | 120 ohm maximum |
Overview
- Monitoring of gas and oil burners as well as gas and oil fired igniters of any load
- Ionisation flame monitoring for continuous operation and intermittent operation
- 4 - 20 mA output signal for remote annunciation (not safety-related)
- LED Bargraph to visualize the quality of the flame
- Simple installation on 35 mm rails according to IEC/EN 60715
Applications
- Power stations
- Chemical industry
- Refineries
- Cement plants
- Waste incinerators
- Steam generators
- Heating plants
Technical Data
Type | AAC 76 |
---|---|
AAC 76 P0D/... | for continuous operation and intermittent operation |
AAC 76 P0D/_G... | Special version with gold plated contacts |
Operating voltage | 230 V or special voltages: 115 V / 125 V / 250 V |
Ambient temperature | - 20 °C to + 60 °C |
Flame monitor | Safety time (flame failure detection time ffdt) ≤ 1/3/5 s |
Display | LED Bargraph, LED flame signal present |
Protection category: Housing | IP 40 |
Protection category: Plug-in terminal time | IP 20 |
Flame signal output | 90 -110 VDC |
Housing attachement | on 35 mm DIN-rail |
Dimensions | 91 x 104 x 119 mm (WxHxD) |
Weight | approx. 0.65 kg |
Output signal current interface | 4 - 20 mA |
Apparent ohmic load | 120 ohm maximum |
Accessories
- Cable for connecting the ionisation electrode to the ionisation flame monitor (kleZ912F0)