Overview
- Self-monitoring and fail-safe in conjunction with a control unit/burner control
- Flame sensors for every spectral range from UV to IR
- Connection to the D-UG 120 control unit, D-UG 660 control unit as well as to the D-GF 150 burner control
- Uniform output signal thus mutually interchangeable
- Adjustable to different combustion technologies such as exhaust gas recirculation
- Compliance to general safety regulations
Applications
- Power stations
- Chemical industry
- Refineries
- Cement plants
- Waste incinerators
- Steam generators
- Heating plants
Technical Data
Operational mode | Intermittent operation, continuous operation and 72-hour operation without permanent supervision |
Safety | Self-monitoring and fail-safe in conjunction with a control unit / burner control |
Gain | four settings |
High-pass filter | three settings |
Spectral ranges | UV, VIS, IR |
Viewing angle | 6° |
Perm. ambient temperature | -20…+60°C |
Sighting tube connection | G 1¼" or 1¼" NPT(F) |
Purge air connection | G ½" or ½" NPT(F) |
Protection class | with cable gland (D-LE 603…-CG) IP65, with axial plug (D-LE 603…-P) IP67 |
Dimensions | 90x92 mm, length approx. 350 mm |
Weight | approx 1.8 kg |
Ex-protection | |
D-LE 603 ../94Ex | II 2G Ex de IIC T5/T6 |
D-LE 603 ../95Ex | Class l, Div. 1, Group B, C & D |
D-LE 603 ../96Ex | Class l, Div. 2, Group A, B, C & D |
D-LE 603 ../97Ex | II 3G Ex nAnC IIC T6 II 3G Ex nA IIC T6 for D-LE 603 I... |
Sighting tube connection | G 1“ (/94Ex, /95Ex) G 1¼" (/96Ex, /97Ex) |
Protection class | IP65 |
Dimensions | diameter 130 mm, length approx. 313 mm |
Weight | approx. 4.3 kg |
Accessories
- Digital display for optimal alignment of flame sensors (D-ZS 087-20)
- Set of orifice plates for insertion in purge air flange (D-ZS 113 Set)
- Optical adjustment aid for alignment of the swivel mount on the sighting tube (D-ZS 118)
- UV-C test light source 230 V / 50 Hz (D-ZS 077-10)
- UV-A, UV-B and IR test light source 230 V/50 Hz (D-ZS 093)
- Swivel mount for the alignment of the flame sensor (D-ZS 033-I)
- Thermal isolator with electrical insulation (D-ZS 117-I)
- Ball valve for closing the sighting tube (D-ZS 133-I)
- Terminal box for connecting flame sensor (D-ZS 140)