CEM Asia
Meet our experts, join our conference sessions, and discover proven solutions for continuous emissions monitoring, ambient air quality, trace gas analysis and emissions data management at CEM Asia 2026, the international conference and exhibition on emissions and air quality monitoring.
From OFCEAS® laser spectroscopy and EN 17255-certified DAHS to predictive emissions monitoring and advanced particulate measurement, DURAG brings measurement expertise and technologies designed to support reliable environmental monitoring and regulatory compliance.
- Date: 17–19 November 2026
- Location: KLCC, Kuala Lumpur, Malaysia
- Stand DURAG GROUP: Booth 57
Two events, one visit: CEM Asia 2026 takes place alongside AQUAMATE Asia, giving registered visitors free access to both exhibitions and conferences covering air emissions, air quality, wastewater and water quality monitoring.
Why visit us
One stop. More ways to measure, understand and manage emissions and air quality.
Meet the DURAG team at booth 57 and explore solutions covering the complete monitoring chain, from measurement and data acquisition to reporting and predictive monitoring.
- Cover more monitoring needs: Stack emissions, particulate matter, mercury, flow, ambient and indoor air quality, GHG and trace gases.
- Prepare for evolving requirements: Explore certified technologies and approaches designed for reliable regulatory and environmental monitoring.
- Turn measurement into actionable data: Combine proven instrumentation with DAHS and predictive monitoring for better visibility and control.
- Discuss your application with our experts: From CEMS and air quality to CCUS, gas purity, cleanrooms and challenging industrial measurement environments.
DURAG conference sessions at CEM Asia 2026
Add these sessions to your schedule and meet our experts during the event.
Tuesday, 17 November 2026
- 15:45 | Room 1
EN 17255 certified DAHS: Securing Emissions Data for Global Climate Compliance
Speaker: Fouad Megdoubi, DURAG GROUP - 16:00 | Room 2
Next-generation ambient air monitoring with D-PAM 2025
Speaker: Maik Nestler, DURAG GROUP
Wednesday, 18 November 2026
- 11:45 | Room 1
Rethinking CEMS: Eliminating Calibration through OFCEAS Laser Spectroscopy while Maintaining Full Regulatory Compliance
Speaker: Owen Webb, DURAG GROUP
Thursday, 19 November 2026
- 10:30 | Room 1
Optimizing Carbon Capture, Storage, and Natural Gas Purity Control with Advanced Trace Gas Analysis Using OFCEAS Technology
Speaker: Owen Webb, DURAG GROUP - 12:30 | Room 1
Regulatory PEMS with advanced data intelligence
Speaker: Maik Nestler, DURAG GROUP - 14:00 | Room 1
CUTTING-EDGE OPTICAL MEASUREMENT DEVICE FOR PM10, PM2.5, PM1 AND AEROSOL SIZE DISTRIBUTION
Speaker: Dr Pooja Chaudhary, DURAG India Instrumentation Pvt Ltd
Featured solutions
Explore some of the DURAG technologies and solutions relevant to the monitoring challenges discussed at CEM Asia 2026.
- LaserCEM® multi-gas CEMS – QAL1 & MCERTS lowest range certified multi-gas stack analyzer using OFCEAS® + LPS®.
- D-R 909 – wet stack particulate analyzer for emission compliance in industrial plants equipped with Wet Flue Gas Desulfurization (FGD) or wet scrubbers as well as dryers/boilers with high moisture in flue gas
- HM 1400 TRX 2 – highly reliable Hg CEMS and process mercury analyzer for emission compliance and precise adjustment of neutralizer injection, vital in reducing pollutant concentrations and adhering to regulatory standards.
- D-FL – Pitot and ultrasonic flue gas flowmeters for calculating pollutant mass release and determining their total discharge to the atmosphere.
- D-EMS 2020 (CEMS DAHS) – Modular, EN 17255 certified environmental & process data management system.
- DATACEMS (PEMS) – Software-based predictive emission monitoring to reduce CAPEX/OPEX.
- GRIMM 11-D – Portable aerosol spectrometer measuring PM fractions and particle size distributions.
- GRIMM EDM 280 – certified and approved optical PM monitor for real-time analysis of TSP, PM10, PM4, PM2.5, PM1, and PMcoarse with a single device, featuring an unmatched precision and reliability, with 0.1 µg/m³ detection limit. Stable by design: no drift, no routine recalibration.
- ProCeas® Air – Direct, trace-level monitoring of GHG and air contaminants such as CH₄, CO₂, NH₃, HF and HCl for ambient air, indoor air, cleanroom and health & safety applications.
- ProCeas® trace gas analysis – Real-time, ppb-level analysis for gas purity (CCUS, hydrogen, LNG/NG/RNG, biogas).
- Igniters, burners, video cameras and flame scanners - Solutions for clean, reliable and safe combustion operation.
Ready to meet us in Kuala Lumpur?
17–19 November 2026 | KLCC, Kuala Lumpur | Booth 57
Meet the DURAG team and discover how advanced measurement technologies can turn environmental data into reliable insights for compliance, process optimization and cleaner air.
Secure your badge | View the full conference programme | Contact our experts
Kuala Lumpur Convention Centre (KLCC), Malaysia
Routenplaner"; var $infowindow = new google.maps.InfoWindow({content: $contentString }); $infowindow.open($map_default,$marker); google.maps.event.addListener($marker, 'click', function() { $infowindow.open($map_default,$marker); }); } else { console.error("Geocode was not successful for the following reason: " + status); } }); } } initializeContent(); }, 750); }