DURAG data systems GmbH
DURAG data systems gmbh
Already at the end of the 70s products for the acquisition and evaluation of emissions of industrial facilities were developed and produced by DURAG GmbH.
Our experienced engineers, software developers and service engineers are forerunners in this field of environment protection. It includes the supervision of official limit values, remote emission data monitoring and also greenhouse gas trading projects.
DURAG data systems gmbhKollaustraße 10522453 Hamburg, Germany +49 40 55 42 18 3000 +49 40 55 42 18 3099 info@durag-data.com Map | DURAG DATA SYSTEMS GmbHBranch Office AustriaLastenstraße 36, City Tower 2 4020 Linz, Austria +43 732 60 99 60-0 +43 732 60 99 60-4 office@durag.com Map |
Managing Directors | |
|---|---|
| David Triebel +49 40 55 42 18 3110 +49 40 55 42 18 3099 david.triebel@durag-data.com |  |
| Maik Nestler+49 3731 30 04 47 +49 3731 30 04 22 maik.nestler@durag-data.com |  |
1978 | |
 | For the measurements of emission values not the possibly strong fluctuating momentary values are of interest, but rather a corresponding mean value. DURAG developed as a pioneer the device GIG 250 for integration of measuring values. which should be compared with a limit value. |
1982 | |
 | With taking effect of the first regulations, such as “Requirements for continuously-recording instruments (Anforderungen für Iaufend auszeichnende Messgeräte)“ according to circular letter of the Ministry of the Interior (Bundesministers des Inneren) from 21st July 1980 and the guidelines at the Environment Agency (Umweltbundesamt) on the “Evaluation of continuous emissions“ (Auswertung kontinuierlicher Emissionen) as of 19th September 1981. DURAG brought the integration and classification device D-IGZGO onto the market. |
1984 | |
 | Early enough with taking effect of the first regulation for large combustion plants - the 13th BImSchV, a classification device with reference value calculation was developed according to the demands and successfully suitability checked by TUV Rheinland e.V. |
1986 | |
 | For the best information an operator could get concerning approval required facilities, system with long-term data storage and visualization were developed with the beginning of the "computer age". |
1988 | |
 | Based on the requirements of the TA-Luit. 13th and 17th BImSchV a compact emission computer was introduced to the market and supports foreign languages the first time. The D-MS 285 was suitability checked according to the guidelines for the evaluation of continuous evaluation measurement by the Rheinisch-Westlalischer TUV e.V.. The suitability announcement was made in the common Ministry letter BMI 19/1988. Visualization of current and historical data was performed optional via software D-EVA on a PC. |
1994 | |
 | The second generation of a complex emission evaluation computer with TFT display, parameterization in plain text and serial interfaces for bus communications was introduced 1995 to the market. The suitability check was carried out by TEN/Nora e.V. with announcement in common Ministerial letter BMI Nr. 33/ S. 703/1995. Visualization of current and historical data and protocols as well. was performed optional via software D-EVA on a PC. |
1995 | |
 | In this year the module emission data remote transfer for the authority according to federal uniform intertace (Bundeseinheitliche Schnitttstelle) was suitability checked by PM Tl'JV with the announcement in the common Ministry letter BMI Nr. 33/ 8703/1995. |
2002 | |
 | In this year a new PC based emission evaluation system generation arise incl. EFÜ with a high availability level by additional storage of raw data in the data communication unit D-MS 500 KB. The modular system, adaptable to any facility size, was suitability checked by TÜV Süd München, with suitability announcement in common Ministry letter BMI2000 Nr. 19 S.403. |
2003 | |
 | With using the Internet more and more naturally has led to the development of a web-based module for data provision to the competent authority and the operator itself in the D-EMS 2000 system. Here the data visualization and download is carried out via a password protected area. In contrast to the classical EFÜ no additional software at the authority and the operator is required. The data transfer goes to the central server via sFTP https:/vwww.efue.de where a daily check of data integrity occurs. The functionality of the module D EFÜ.WWW meets all requirements of the "uniform national interface definition (bundeseinheitiiche Schnittstellendefinition)". |
2007 | |
 | To achieve the internationally agreed reduction targets for greenhouse gas emissions according to Kyoto protocol article 12, besides limitation of CO2 emissions in the developed countries also greenhouse gas emission reductions through technology transfer can contribute. Such CDM/JI projects require the use of tested methods and are under strict control of the UNFCCC. To furnish the proof of the intended system use, reliable data material for the verification and evaluation including documentation of the greenhouse gas reductions achieve, the module D-EMS 2000 CDM/JI was developed in accordance with the approved UNFCCC methods. |
2008 | |
 | The division "Environmental Data Management“ of the DURAG GmbH was outsourced into a new company. The subject of this new company are turnkey environmental and process data management systems, projected, manufactured, parameterized, delivered and put into operation by this company. Development and production of systems is carried out in Hamburg. Services such as parameterization, commissioning, maintenance and fault disposals are offered regionally in Hamburg, Ratingen, Bad Boll and Freiberg. |
2009 | |
 | Following the demands of the market a compact emission computer system was designed that consists of modem computer technology components. The system is Linux based, has no moving parts (no fans, hard disk storage technology) and thus a very high availability. A VNO server and an HTTP server are integrated in the device and allow visualization and remote operation. The D-EMS 2000 AiO is for all installations according to 13th, 17th, 27th, 30th and 31st BImSchV suitability checked by TÜV Süd München. The announcement was made in the Federal Gazette (Bundesanzeiger) 2009 Nr. 38 S. 903. |
Data Management
D-EMS 2000 Systems
D-EMS 2000 Modules
D-EMS 2000 Applications
D-EMS 2000 Services
Location Hamburg
+49 40 55 42 18 3000
+49 40 55 42 18 3099
info@durag-data.com
Location Ratingen
+49 2102 7400 0
+49 2102 7400 28
info@durag-data.com
Location Bad Boll
+49 7164 912 25 0
+49 7164 912 25 50
info@durag-data.com
Location Freiberg
+49 3731 3004 0
+49 3731 3004 22
info@durag-data.com
Services
- Parameterisation and implementing from D-EMS 2000 Systems including EC 14 181 according to national directives:
- TA-Luft
- 1.BImSchV
- 2.BImSchV
- 13.BImSchV
- 17.BimSchV
- 27.BImSchV
- 30.BImSchV
- 31.BImSchV - Parameterisation and implementing from D-EMS 2000 Systems including EC 14 181 according to European directives:
- 2001/80/EU LCPD
- 2000/76/EU WID - Parameterisation and implementing from D-EMS 2000 Systems including EC 14 181 according to UNFCCC directives:
- ACM 0001
- AM 0021
- AM 0028
- AM 0034 - D-EMS 2000 Interconnections:
- TCP/IP- network
- ASCII- file interfaces via FTP or sFTP
- Modbus
- Profibus
- ELAN
- OPC UA
Maintenance, Support, On Call Support and Webhosting
Brochure D-EMS 2000 / EN