Flare Pilot Burners (flame front ignition)
Ignition of waste gas from pipe flares, air and steam assisted flares and ground flares. For most flare systems the pilot burner can not be accessed for service. Maintenance or replacement is not possible while the flare is in operation. To safeguard operation, Smitsvonk’s pilots provide reliable ignition and stable burning even under the most difficult climate conditions.
Overview
- Long lifetime, longer maintenance intervals
- Insensitive to moisture and dirt
- Complete delivery; thermocouple cables, junction boxes and flame front generator
- Self-aspirating or forced air supply
- Integrated and protected thermocouple
- Functionally tested to client specifications
- Construction completely out of high temperature-resistant stainless steel
Applications
- Ignition of flares in the (petro) chemical industry
- Ignition of flares in the oil and gas industry
- Ignition of flares in the steel industry
- Biogas flares
Technical Data
common data | |
---|---|
pipe diameter | 2“ (60 mm) |
length | 2600 mm or 3000 mm |
design | angled |
air requirement | self-aspirating |
gas connection | 3/4" Ansi 150 Lbs RF |
FFG connection | 1" Ansi 150 Lbs RF |
supply gas | natural gas or propane/butane refinery gas (max. 40 vol% H2) |
options | refinery gas, up to 100% H2, coke gas, biogas |
materials | mainly 310 SST Option: Incoloy 800 HT |
windcap diameter | 3“ |
mounting hooks | included |
flame detection | by thermocouple type K |
option | double thermocouple 2 separate thermocouples |