DURAG data systems GmbH

DURAG data systems GmbH

Уже к концу 70-х компанией DURAG GmbH была разработана и производилась продукция для сбора и оценки данных о мониторинге промышленных выбросов. Наши опытные инженеры, программисты и специалисты по обслуживанию занимают ведущее положение в этой области защиты окружающей среды.

Система управления данными мониторинга выбросов охватывает надзор за официальными предельными значениями, дистанционный мониторинг данных о выбросах, а также проекты по торговле квотами на выбросы парникового газа.

УПРАВЛЯЮЩИЙ ДИРЕКТОР

Давид Трибель

+49 40 55 42 18 3110
+49 40 55 42 18 3099


Майк Нестлер

+49 3731 30 04 47
+49 3731 30 04 22

DURAG data systems gmbh

Kollaustraße 105
22453 Hamburg, Germany
 +49 40 55 42 18 3000
 +49 40 55 42 18 3099

 Map

UTAS – DR. LASINGER

Дочерняя компания
DURAG DATA SYSTEMS GMBH
Lastenstraße 36, City Tower 2
4020 Linz, Austria
 +43 732 60 99 60-0
 +43 732 60 99 60-4

Map

1978

For the measurements of emission values not the possibly stroneg fluctuating momentary values are interested but rather a corresponding mean valueDurag developed as a pioneer the device GIG 250 for integration of measuring values. which should be compared with a limit value.

1982

With taking effect of the first regulations. Such as “Requirements for continuously-recording instruments (Anforderungen für Iaufend auszeichnende Messgeräte)“ according to circular letter of the Ministry of the Interior (Bundesministers des Inneren) from 21st July
1980 and the guidelines at the Environment Agency (Umweltbundesamt) on the “Evaluation of continuous emissions“ (Auswertung
kontinuierlicher Emissionen) as of 19th September 1981. Durag brought the integration and classification device D-IGZGO on the
market.

1984

Early enough with taking effect of the first regulation for large combustion plants - the 13th BImSchV, a classification device with reference value calculation was developed according to the demands and successfully suitability checked by TUV Rheinland e.V.

1986

For the best information an operator could get concerning approval required facilities, system with long-term data storage and visualization were developed with the beginning of the "computer age".

1988

Based on the requirements of the TA-Luit. 13th and 17th BImSchV a compact emission computer was introduced to the market and
supports foreign languages the first time. The D-MS 285 was suitability checked according to the guidelines for the evaluation of continuous evaluation measurement by the Rheinisch-Westlalischer TUV e.V.. The suitability announcement was made in the common
Ministry letter BMI 19/1988. Visualization of current and historical data was performed optional via software D-EVA on a PC.

1994

The second generation of a complex emission evaluation computer with TFT display, parameterization in plain text and serial interfaces for bus communications was introduced 1995 to the market. The suitability check was carried out by TEN/Nora e.V. with announcement in common Ministerial letter BMI Nr. 33/ S. 703/1995. Visualization of current and historical data and protocols as well. was performed optional via software D-EVA on a PC.

1995

In this year the module emission data remote transfer for the authority according to federal uniform intertace (Bundeseinheitliche Schnitttstelle) was suitability checked by PM Tl'JV with the announcement in the common Ministry letter BMI Nr. 33/ 8703/1995.

2002

In this year a new PC based emission evaluation system generation arise incl. EFÜ with a high availability level by additional storage of raw data in the data communication unit D-MS 500 KB. The modular system, adaptable to any facility size, was suitability checked by TÜV Süd München, with suitability announcement in common Ministry letter BMI2000 Nr. 19 S.403.

2003 

With using the Internet more and more naturally has led to the development of a web-based module for data provision to the competent
authority and the operator itself in the D-EMS 2000 system. Here the data visualization and download is carried out via a password protected area. In contrast to the classical EFÜ no additional software at the authority and the operator is required. The data transfer goes to the central server via sFTP https:/vwww.efue.de where a daily check of data integrity occurs. The functionality of the module D EFÜ.WWW meets all requirements of the "uniform national interface definition (bundeseinheitiiche Schnittstellendefinition)".

2007 

To achieve the internationally agreed reduction targets for greenhouse gas emissions according to Kyoto protocol article 12, besides limitation of CO2 emissions in the developed countries also greenhouse gas emission reductions through technology transfer can contribute. Such CDM/JI projects require the use of tested methods and are under strict control of the UNFCCC. To furnish the proof of the intended system use, reliable data material for the verification and evaluation including documentation of the greenhouse gas reductions achieve, the module D-EMS 2000 CDM/JI was developed in accordance with the approved UNFCCC methods.

2008 

The division "Environmental Data Management“ of the Durag GmbH was outsourced into a new company. The subject of this new company are turnkey environmental and process data management systems, projected, manufactured,  parameterized,  delivered and put into operation by this company. Development and production of systems is carried out in Hamburg. Services such as parameterization, commissioning, maintenance and fault disposals are offered regionally in Hamburg, Ratingen, Bad Boll and Freiberg.

2009

Following the demands of the market a compact emission computer system was designed that consists of modem computer technology components. The system is Linux based, has no moving parts (no fans, hard disk storage technology) and thus a very high availability. A VNO server and an HTTP server are integrated in the device and allow visualization and remote operation. The D-EMS 2000 AiO is for all installations according to 13th, 17th, 27th, 30th and 31st BImSchV suitability checked by TÜV Süd München. The announcement was made in the Federal Gazette (Bundesanzeiger) 2009 Nr. 38 S. 903.

управление данными

Системы D-EMS 2000
Модули D-EMS 2000
Области применения D-EMS 2000
Услуги для D-EMS 2000

Место нахождения Гамбург

+49 40 55 42 18 3000
+49 40 55 42 18 3099

 

Место нахождения Ратинген

+49 2102 7400 0
+49 2102 7400 28

 

Место нахождения Бад-Болль

+49 7164 912 25 0
+49 7164 912 25 50

 

Место нахождения Фрайберг

+49 3731 3004 0
+49 3731 3004 22

 

Услугиs

  • Определение параметров и реализация из систем D-EMS 2000, включая EC 14 181 в соответствии с национальными директивами:
    - TA-Luft
    - 1.BImSchV
    - 2.BImSchV
    - 13.BImSchV
    - 17.BimSchV
    - 27.BImSchV
    - 30.BImSchV
    - 31.BImSchV

  • Определение параметров и реализация из систем D-EMS 2000, включая EC 14 181 в соответствии с европейскими директивами:
    - 2001/80/EU LCPD
    - 2000/76/EU WID

  • Определение параметров и реализация из систем D-EMS 2000, включая EC 14 181 в соответствии с директивами UNFCCC:
    - ACM 0001
    - AM 0021
    - AM 0028
    - AM 0034

  • Объединение D-EMS 2000:
    - TCP/IP- network
    - ASCII- файловые интерфейсы через FTP или sFTP
    - Modbus
    - Profibus
    - ELAN
    - OPC UA

Техническое обслуживание, Поддержка, Поддержка по вызову и Веб-хостинг

Варианты связи с Вами

Email

конта́кт

Sales

продажи

Service

се́рвис