Solutions for waste incineration
Here you will find an overview of our solutions for waste incineration. Please click on the plus signs in the graphic for more information.
D-VTA 200 Grate firing
Gas fired ignition and pilot burners
Dust and opacity monitors
Volume flow measurement systems
HM-1400 TRX 2
AirQualifier EDM 264
|Combustion and safety monitoring||Process and environmental monitoring|
Products combustion and safety monitoring
Forced draft operated gas ignition and pilot burner
Forced draft operated gas ignition and pilot burner with nozzle mixing device in compact, modular design for plant-specific solutions and fuel flexibility.
Self-aspirating gas ignition and pilot burner
Self-aspirating 38, 48 or 54 mm gas igniter for reliable ignition of a main burner.
D-LX 201/721Optical compact flame monitor
Flexible and selective compact flame monitor for high requirements. For optical monitoring of all fuel flames, including in complex multi-burner plants.
D-LE 603/703Optical flame sensor
UV, VIS or IR flame sensor for combination with a control unit or automatic burner control. For optical monitoring of all fuel flames, including in complex multi-burner plants.
D-UG 660Control unit
Control unit for high requirements, for combination with optical flame sensors. For monitoring gas, oil and coal flames, including in complex multi-burner plants.
D-FS 50Furnace camera
Compact furnace camera with air or water cooling for visualization of combustion chambers, combustion processes, flames and other hot processes.
D-VTA 200 for grate firingVideo and thermography system
Video and thermography system for grate fired furnaces for monitoring the out burning zone on the grate. Used for automated combustion control and to optimize SNCR injection, saving costs and reducing wear.
D-HG 500High energy ignition device
High energy ignition device with max. 112 J/s for direct and reliable ignition of gas and liquid fuels. The ignition frequency and duration are variable.
Products process and environmental monitoring
D-EMS 2020Environmental and process data management system
Data acquisition and handling system (DAHS) for the acquisition, calculation, long-term storage and visualization of data in the most diverse areas. Compliant with European and US EPA-based regulations.
D-R 909Extractive dust monitor
Extractive continuous dust measurement of small to medium dust concentrations in wet flue and process gases even under difficult plant conditions.
Certified device for continuous monitoring of particulate matter concentrations in ambient air. Measures the absorption of beta radiation from a C-14 source by particulate matter.
D-FL 100Volume flow measuring system
For continuous volume flow measurement in dry gases. Reliable, even under extreme operating conditions.
D-FL 220Volume flow measuring system
For continuous, contactless volume flow measurement in dry and humid gases. Reliable, even under demanding operating conditions.
HM-1400 TRX 2Total mercury analyzer
Total mercury analyzer for continuous process and emission monitoring. With option for separate determination of elemental and oxidized mercury species.
D-R 320Dust monitor
For continuous, contactless measurement of low to medium dust concentrations in dry flue and process gases. Also suitable for corrosive gases and potentially explosive atmospheres.
D-R 808Dust monitor
For continuous measurement of low to medium dust concentrations in dry flue and process gases. Single-sided installation for difficult plant conditions.
D-R 290Dust and opacity monitor
For continuous, contactless dust and opacity measurement at medium to high concentrations in dry flue and process gases. Also suitable for difficult plant conditions.
D-R 220Dust and opacity monitor
The cost-effective solution for continuous, contactless dust and opacity measurement at medium to high concentrations in dry flue and process gases.
For monitoring the efficiency and function of filters and filter systems by qualitative measurement of the dust concentration in dry process and flue gases.
AirQualifier EDM 264Mobile PM monitor
This mobile aerosol spectrometer determines dust mass fractions and particle number size distribution. It is designed for both short and long-term continuous monitoring of dust pollution and enables real-time data analysis of particle number, dust mass and meteorological data.
EDM 180Approved PM monitor
This approved environmental dust monitor is the leading product for measuring particulate matter concentration (PM10, PM2.5) in ambient air. It is in service in government networks and institutions in over 30 countries.
EDM 180+Approved next generation PM monitor
Provides all features of the EDM 180 plus additional USB and Ethernet interfaces. This approved environmental dust monitor is the leading product for measuring particulate matter concentration (PM10, PM2.5) in ambient air. It is in service in government networks and institutions in over 30 countries.